Investigation of La0.6Sr0.4Co1-xNixO3-δ (x=0, 0.2, 0.4, 0.6, 0.8) catalysts on solid oxide fuel cells anode for biogas dry reforming

The introduction of catalyst on anode of solid oxide fuel cell (SOFC) has been an effective way to alleviate the carbon deposition when utilizing biogas as the fuel. A series of La_0.6Sr_0.4Co_1-xNi_xO_3-δ (x = 0, 0.2, 0.4, 0.6, 0.8) oxides are synthesized by sol-gel method and used as catalysts precursors for biogas dry reforming. The phase structure of La_0.6Sr_0.4Co_1-xNi_xO_3-δ oxides before and after reduction are characterized by X-ray diffraction (XRD). The texture properties, carbon deposition, CH₄ and CO₂ conversion rate of La_0.6Sr_0.4Co_1-xNi_xO_3-δ catalysts are evaluated and compared. The peak power density of 739 mW cm^?2 is obtained by a commercial SOFC with La_0.6Sr_0.4Co_0.4Ni_0.6O_3-δ catalyst at 850 °C when using a mixture of CH₄: CO₂ = 2:1 as fuel. This shows a great improvement from the cell without catalyst for internal dry reforming, which is attributed to the formation of NiCo alloy active species after reduction in H₂ atmosphere. The results indicate the benefits of inhibiting the carbon deposition on Ni-based anode through introducing the La_0.6Sr_0.4Co_0.4Ni_0.6O_3-δ catalyst precursor. Additionally, the dry reforming technology will also help to convert part of the exhaust heat into chemical energy and improve the efficiency of SOFC system with biogas fuel.     

Recent advances during CH4 dry reforming for syngas production: A mini review

Given the continuing issues of environment and energy, methane dry reforming for syngas production have sparked interest among researchers, but struggled with the process immaturity owing to catalyst deactivation. This review summarizes the recent advances in the development of efficient and stable catalysts with strong resistance to coking and metal sintering, including the application of novel materials, the assessment of advanced characterizations and the compatibility to improved reaction system. One feasible option is the crystalline oxide catalysts (perovskite, pyrochlore, spinel and LDHs), which feature a fine metal dispersion and surface confinement effect via a metal exsolution strategy and exhibit superior reactivity and stability. Some new materials (h-BN, clays and MOFs) also extend the option because of their unique morphology and microstructure. It also is elaborated that progresses were achieved in advanced characterizations application, leading to success in the establishment of reaction mechanisms and attributions to the formed robust catalysts. In addition, the perspective described the upgrade of reaction system to a higher reaction efficiency and milder reaction conditions. The combination of efficient reaction systems and robust catalysts paves a way for a scaling-up application of the process.     

液体饮料PET无菌灌装工艺与装备研发进展

文章对目前液体饮料PET无菌灌装工艺与装备进行了归纳与总结，并对其研发趋势进行了展望，以期为液体饮料生产中PET无菌灌装技术的应用及优化提供相关依据。     

日本优良食味稻米灌浆期水管理、鲜谷干燥温度及糙米水分与食味关系研究（译文）

为了生产优良食味稻米,克服栽培环境的影响非常重要。主要论述了灌浆期最适宜的用水管理、新鲜稻谷的干燥温度以及糙米水分含量与其食味之间的关系。水稻灌浆期最适宜的用水管理是湿润管理法,通过对灌浆期水稻的湿润管理,可有效抑制水田土壤温度上升,保持根系活力,提高稻米结实率,最终实现稻米增收与食味提升。新鲜稻谷水分含量不同,干燥所需的送风温度也不同,22%、25%、30%的水分含量分别对应的适宜温度为55、48、35℃。糙米中14%～15%的水分含量能够保证稻米的最佳食味。     

汽车加油口双色注射模设计

分析了汽车加油口塑件结构,确定了注射成型方案、进胶方式,并介绍了通过滑块与开模动作配合实现塑件脱模的过程。     

Nitrogen dry deposition to Lake Superior and Lake Michigan

Nitrate (NO₃^?) levels in Lake Superior have increased from historic levels of about 5?μM to its current concentration of about 25?μM. The atmosphere makes a substantial contribution to the nitrogen budgets for Lake Superior and Lake Michigan. This study provides a more well-defined estimate of nitrogen dry deposition rates derived from the measurement of over-water concentrations, and in situ meteorological measurements, which were input into the Resistance Model. We obtained a nitrogen dry deposition rate of [(3.41?±?2.26)?×?10⁷?kg?N/yr; (5.90?±?3.91)?kg?N/ha/yr] over Lake Michigan, and [(1.54?±?1.06)?×?10⁷?kg?N/yr; (1.87?±?1.27)?kg?N/ha/yr] over Lake Superior. Nitric acid (HNO₃), which originates from the combustion of fossil fuels, contributes 84% of the total nitrogen dry deposition to Lake Michigan; and 66% to Lake Superior. Ammonia (NH₃), which originates from agricultural activities and gasoline combustion, is the second highest contributor of nitrogen dry deposition to both lakes: contributing 13% to Lake Michigan and 32% to Lake Superior. The nitrogen dry deposition is approximately 68% of the nitrogen wet deposition over Lake Superior, and approximately 80% of wet deposition over Lake Michigan. The over-water dry deposition velocity of HNO₃ and NH₃ were also evaluated. We obtained morning deposition velocities of 0.099?cm/s for NH₃ and 0.095?cm/s for HNO₃; and afternoon values of 0.137?cm/s for NH₃ and 0.132?cm/s for HNO₃. Another key finding is that the atmospheric concentrations of nitrogen compounds near Lake Michigan and Lake Superior have decreased since 2003.     

Experimental investigation of different morphology textured ceramic tools by in-situ formed for the dry cutting

Surface texture is considered an important measure to improve the cutting performance of a tool. In this study, we have prepared three types of textured and conventional tools on the rake face by an in-situ formed method. During the experiment, the best parameters of three types of textured tools were selected for dry cutting AISI 1045 steel at different cutting speeds. Cutting forces, cutting temperatures, workpiece surface roughness, and tool wear were measured during the cutting process. The results showed that textured tools have significantly reduced cutting force, cutting temperature, and tool wear, and the roughness of the workpiece was improved compared with the conventional tool. The micro-pit texture tool has less stress contact region than the micro-groove width texture tool, but the micro-groove width texture tool exhibiting the best cutting performance. This investigation clearly showed that the textured tool prepared by the in-situ formed method has improved cutting performance.     

超临界二氧化碳干气密封相态分布规律与密封性能研究

以超临界二氧化碳干气密封为研究对象，分别以维里方程、Lucas方程描述二氧化碳真实气体效应、黏度的变化，在考虑阻塞流效应的同时，采用有限差分法对考虑离心惯性力效应的Reynolds方程与能量控制方程进行耦合求解，分析讨论了工况参数与槽形结构参数对其相态分布规律与密封性能的影响。研究表明：S-CO₂从密封端面进口至出口的流动过程中，如果工况参数设置合理，将由超临界态逐渐转变为气态，并不会出现液态；较低的进口压力、进口温度以及转速，均会容易导致潜在的凝结流动发生；相比于工况参数对相态分布的影响，槽形参数对相态分布的影响较小，近乎可以忽略；开启力除了随进口温度的升高而减小外，均随进口压力、转速、槽深、螺旋角的增大而增大；泄漏率随进口温度和转速的增大而减小，但其随进口压力、槽深、螺旋角的增大而增大。这些结果为进一步研究超临界二氧化碳干气密封提供了一定的支撑。     

超临界二氧化碳干气密封稳态性能研究

以超临界二氧化碳(S-CO_2)干气密封为研究对象,建立变黏度变密度雷诺方程,通过构建物性数据库的方式对黏度及密度进行处理,并采用有限差分法对控制方程进行求解,得到端面压力分布,并计算开启力、泄漏量、摩擦扭矩和气膜刚度等稳态性能参数。结果表明:随着压力、转速的增大,开启力、泄漏量、摩擦扭矩、气膜刚度等参数均增大;随着槽坝比和槽深的增加,开启力、泄漏量和气膜刚度均增大,摩擦扭矩减小;随着槽数的增加,各稳态性能参数均减小;将槽坝比控制在0.5～1的范围内,有助于提高密封稳定性。     

湖南省郴州市饭垄堆北段锡钨多金属矿勘查方法优化

湖南省郴州市饭垄堆北段锡钨多金属矿位于湘南钨锡钼铋多金属成矿带东坡矿田内，成矿地质条件优越，具有很好的找矿前景。根据该矿床地质特征以及已有的地质矿产勘查成果，系统总结了矿区101、102、103号主矿体特征。在此基础上，进一步讨论了该类裂隙充填细脉带型锡钨多金属矿床在勘查过程中探矿工程布置的优化方法：即：①探矿工程不宜按每个矿带单独控制，应对整个赋矿层位进行整体控制；②应对含有毒砂、锡、钨细脉的岩性段进行连续取样化验，既可避免漏矿，又可以为将来工业指标调整后重新圈定矿体提供直接依据。